Flash 9: Failed to Install tn_19166 - can't get it to install

[cgmoore64]

Hi,

I've tried to install Flash 9 a number of times but continue to get the same
error message:

Failed to install. For Troubleshooting please see:
http://www.adobe.com/go/tn_19166 (which is a dead link by the way)

See my system info below. I also tried everything under tn_19166 and the info
in the forum posted at the bottom of this post.

Any suggestions on how to resolve the issue?

Thanks,

Chris

SYSTEM INFO
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 2 Build 2600
System Model Dell Inspiron 8500
Processor x86 Family 15 Model 2 Stepping 9 GenuineIntel ~2193 Mhz
BIOS Version/Date Dell Computer Corporation A06, 7/12/2004
SMBIOS Version 2.3
Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
Total Physical Memory 512.00 MB
Available Physical Memory 143.99 MB
Total Virtual Memory 2.00 GB
Available Virtual Memory 1.96 GB


ACTIONS TRIED
01/15/2008 11:55:34 PM
Reply | Quote | Top | Bottom

Download the uninstaller for Flash Player from "How to uninstall the Adobe
Flash Player plug-in and ActiveX control"

http://www.adobe.com/go/tn_14157

Quit ALL running applications, including all Internet Explorer or other
browser windows, AOL Instant Messenger, Yahoo Messenger, MSN Messenger, or
other Messengers. Check the Windows system tray carefully to make certain no
applications which might possibly use Flash Player are still in memory.

Install the new Flash Player from here:

www.adobe.com/go/getflashplayer

Check to see if Flash Player is installed:

http://www.macromedia.com/software/flash/about/

--------------------------------------------------------------------------------
Regards,

Darren J. McNally,
Technical Support Engineer, Adobe
Flash/Flash Player Support

[aligator347]

I would like to hear a response because I am having a similar problem.

[IdidntWantAccount]

i HAD Same problem ....... wat i did was go to contoll panel / click ADD or
remove programs
/ then i delte all types of flash player / it wont install if ur like say ,
using it or sumtin / then i installed it and it work


... i have an xp compaq

[cgmoore64]

Yep, already did all dat. Didn't wrk.

[[e-mail]]

I too, would like to hear a response as I did the suggested uninstall procedure
the same as above. I am on a Windows Me platform and the install process just
sits. I get the box for the video to play in but no video,so I assume the
install is not successful.

[kennydont]

I am having the same problem! It is driving me nuts. I have done everything
this website has told me to. my mother-in-law had the same problem and can't
remember how she fixed it, so if someone could figure out this mystery it would
be MUCH APPRECIATED!!

[KimiRaikkonen]

Please someone post a guide about this. Thanks

KimiRaikkonen from http://www.qualityinsurancedirectory.com

[cgmoore64]

Hi,

Anyone have any suggestions on how to resolve?

[dr00t]

Having the same problem.

Using XP with Internet Explorer 7. My firefox works fine, but I need to get Flash Player working in my IE7.

[dr00t]

Alright everyone, I have solved this issue. I hope it works for all of you as
well.

You must have administrator privileges to successfully complete these
instructions.

1. Follow the instructions to download the SubInACL tool from the Microsoft
Download Center.
http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf
-ed6985e3927b&displaylang=en

2. Install SubInACL.

3. Download the reset_minimal.zip file.
http://www.adobe.com/support/flashplayer/ts/documents/fb1634cb/reset_minimal.zip

4. Extract the reset_minimal.cmd file to C:\Program Files\Windows Resource
Kits\Tools\.

5. *Important: Be sure that both the subinacl.exe and reset_minimal.cmd files
are in the same location here: C:\Program Files\Windows Resource Kits\Tools\.

6. Double-click reset_minimal.cmd.

7. This will open a command window and execute the SubInACL tool.

8. Do not use the machine while SubInACL is running.

9. When it is finished you will see "Press any key to continue".

10. Install the Flash Player from www.adobe.com/go/getflashplayer.

[fdarweesh]

[q][i]Originally posted by: [b][b]dr00t[/b][/b][/i]
Alright everyone, I have solved this issue. I hope it works for all of you as
well.

You must have administrator privileges to successfully complete these
instructions.

1. Follow the instructions to download the SubInACL tool from the Microsoft
Download Center.
http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf
-ed6985e3927b&displaylang=en

2. Install SubInACL.

3. Download the reset_minimal.zip file.
http://www.adobe.com/support/flashplayer/ts/documents/fb1634cb/reset_minimal.zip

4. Extract the reset_minimal.cmd file to C:\Program Files\Windows Resource
Kits\Tools\.

5. *Important: Be sure that both the subinacl.exe and reset_minimal.cmd files
are in the same location here: C:\Program Files\Windows Resource Kits\Tools\.

6. Double-click reset_minimal.cmd.

7. This will open a command window and execute the SubInACL tool.

8. Do not use the machine while SubInACL is running.

9. When it is finished you will see "Press any key to continue".

10. Install the Flash Player from www.adobe.com/go/getflashplayer.[/q]

Ok i'd tryed this way and it doesnt work for me ,after that I'd downloaded the
uninstall_flash_player.exe from adobe
and make the uninstalling ,after this I'd did your 10 steps and now it is
working

[cgmoore64]

It worked for me. I first uninstalled Flash and then went through the steps out-lined and it all works fine for me.

Thanks,

Chris

[Darren McNally - Adobe]

If you?re having difficulties with the ActiveX installer on IE these steps will
typically resolve the issue:

Try this first: Instructions for uninstalling and reinstalling the Flash
Player:

1. First download the uninstaller to your desktop from here
http://www.adobe.com/go/tn_14157
2. Before running this uninstaller be sure to read the instruction and close
all running programs.
3. Open the following folder C:\WINDOWS\system32\Macromed\Flash
4. Run the uninstaller
5. What files are left in this folder? C:\WINDOWS\system32\Macromed\Flash
6. If there are files left, delete the Flash folder.
7. Install the Flash Player from here: ]http://www.adobe.com/go/getflashplayer
8. Test the Flash Player here: http://www.adobe.com/products/flash/about/

Also check your Internet Explorer ActiveX settings

Browser security settings should be chosen by you or by your system
administrator. For single users who do not have an administrator, the Medium:
Default Level allows you to view Flash content. For any Custom Level, ensure
that both the "Download Signed ActiveX controls" and "Run ActiveX controls and
plug-ins" options are set to "Prompt".

To change your security level:

1. Open Internet Explorer.
2. Choose Tools > Internet Options.
3. Select the Security tab.
4. Select Custom Level.
5. Find the section "ActiveX controls and plug-ins".
6. Set ' Download Signed ActiveX Controls' to Prompt.
7. Set 'Run ActiveX Controls And Plug-ins' to Prompt.

If you are having trouble, make sure that your Internet Explorer security
level is not set to High or to a custom level that does not allow viewing of
ActiveX controls.

Finally, it may be that you have incorrect permissions in the system registry:

To fix these Windows system registry permission conflicts you can use
Microsoft?s SubInACL tool.

Please download Microsoft?s tool to your desktop.

http://www.supportflash.com/reset_min.zip

1. Login as the User that has the incorrect permissions in the system registry
2. unzip the ?reset_minimal.cmd? and the ?subinacl.exe? to the desktop

*** Make sure both files are on the desktop

3. Close out all applications
4. Run the ?reset.cmd? file
5. It will open a DOS like terminal and start running through registry keys
6. When it is finished it will say ?press any key to continue?
7. At this point you can download the latest Flash Player from here:

http://www.adobe.com/go/getflashplayer

[ZooeyC]

Darren at Adobe,

Thanks for getting involved on this issue. My Flash has not worked in about
two months.

I have followed all of your suggestions but still no luck. After performing
all the fix steps and when attempting to install from the
adobe.com/go/getflashplayer page I get a tn_19166 error message again. Also,
when I ran the reset_minimal.cmd, which runs subinacl.exe in the registry, and
I look back at what it did in the registry, the only message displayed over and
over is (something like) "did not recogize subinacl as an internal or external
command." Does this mean it is not fixing the registry problem?

Please let me know if you have any other suggestions to fix. Thanks.

[googoogajoo]

I found a solution that may help with the Flash Player installation. I
have Windows XP Home and Internet Explorer 7. I did EVERYTHING tech support and
other users suggested, but had no luck on Internet Explorer. I followed the
suggestion to download Firefox, and then I was able to download and use Flash
Player, but it would only work with Firefox. It would not work with Explorer.
Coincidentally, in trying to open another unrelated application, I was
told that Windows could not open it and I chose the option to use the Internet
to search for a way to open it. It prompted to download additional software,
and one of the options was a free version of a registry compression tool called
"Stuffit". After downloading and installing Stuffit, I once again followed
Adobe tech support's original instructions for Flash Player.
1. Make sure you are in Administrator Mode.
2. Make sure your Active X settings are correct.
3. Make sure your popup blocker is turned off.
4. Use the Flash Player uninstaller, making sure all applications are closed,
and all users are logged off.
5. Then download Flash Player 9 using a standalone installer from the
following:
?http://www.adobe.com/go/tn_14266? (Archived Adobe Flash Players available
for testing purposes).
6. After downloading the installer, make sure all other applications and
windows are closed, then open the ?9r115?
folder and run the ?flashplayer9r115_winax.exe? file.
7. Afterwards, verify if the Flash Player installed successfully by going to
the version test page:
?http://www.adobe.com/go/tn_15507?.

This finally worked for me after NOTHING else did. I hope it helps you.

[googoogajoo]

I found a solution that may help with the Flash Player installation. I
have Windows XP Home and Internet Explorer 7. I did EVERYTHING tech support and
other users suggested, but had no luck on Internet Explorer. I followed the
suggestion to download Firefox, and then I was able to download and use Flash
Player, but it would only work with Firefox. It would not work with Explorer.
Coincidentally, in trying to open another unrelated application, I was
told that Windows could not open it and I chose the option to use the Internet
to search for a way to open it. It prompted to download additional software,
and one of the options was a free version of a registry compression tool called
"Stuffit". After downloading and installing Stuffit, I once again followed
Adobe tech support's original instructions for Flash Player.
1. Make sure you are in Administrator Mode.
2. Make sure your Active X settings are correct.
3. Make sure your popup blocker is turned off.
4. Use the Flash Player uninstaller, making sure all applications are closed,
and all users are logged off.
5. Then download Flash Player 9 using a standalone installer from the
following:
?http://www.adobe.com/go/tn_14266? (Archived Adobe Flash Players available
for testing purposes).
6. After downloading the installer, make sure all other applications and
windows are closed, then open the ?9r115?
folder and run the ?flashplayer9r115_winax.exe? file.
7. Afterwards, verify if the Flash Player installed successfully by going to
the version test page:
?http://www.adobe.com/go/tn_15507?.

This finally worked for me after NOTHING else did. I hope it helps you.

[wongnog]

Hey guys, I am having the same problems installing Flash 9 on IE7 with WinXP
Pro SP3. I have run the uninstaller (checked the log and made sure everything
was removed", run subinacl and the reset_minimal.cmd file, checked my active-x
and IE security settings, have an administrator account, disabled all popup
blockers and anti-virus programs (basically all my background programs are
exited), but I still can't install the Flash Player 9 Active-X for Internet
Explorer. I also can't install it from the Flash page which downloads it
directly to IE7. Here is a copy of my install.log file, I hope this helps
someone.

Call: 397
Safety Check
Call: 79
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\UserInfo.dll"
File: wrote 4096 to "C:\Temp\nsd50.tmp\UserInfo.dll"
CheckAdminPermissions Name = Jason Wong
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\UserInfo.dll"
File: skipped: "C:\Temp\nsd50.tmp\UserInfo.dll" (overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 111
Call: 111
Call: 37
Jump: 74
GetWindowsVersion -

CheckSupportedPlatform - OS=XP

Call: 403
CheckFPPermissions
Call: 37
Jump: 74
GetWindowsVersion - XP

Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\fpinstall.dll"
File: wrote 8704 to "C:\Temp\nsd50.tmp\fpinstall.dll"
ObjectExistsAndIsOwnedBySomeoneElse = 1
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\UserInfo.dll"
File: skipped: "C:\Temp\nsd50.tmp\UserInfo.dll" (overwriteflag=1)
End Safety Check
File: overwriteflag=4, allowskipfilesflag=2, name="Flash9f.ocx"
File: wrote 2991488 to "C:\WINDOWS\system32\Macromed\Flash\Flash9f.ocx"
File: overwriteflag=4, allowskipfilesflag=2, name="FlashUtil9f.exe"
File: wrote 218496 to "C:\WINDOWS\system32\Macromed\Flash\FlashUtil9f.exe"
End Main Section
Section: ""
Start Post Section
Call: 448
CallUninstallers
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: wrote 17920 to "C:\Temp\nsd50.tmp\NSISArray.dll"
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=0,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Jump: 759
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Jump: 758
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Jump: 758
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Jump: 758
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Jump: 758
Call: 886
File: overwriteflag=1, allowskipfilesflag=2,
name="C:\Temp\nsd50.tmp\NSISArray.dll"
File: skipped: "C:\Temp\nsd50.tmp\NSISArray.dll" (overwriteflag=1)
Jump: 758
Call: 886
File: overwriteflag=1, allowsk

[Darren McNally - Adobe]

[q][i]Originally posted by: [b][b]wongnog[/b][/b][/i]
Hey guys, I am having the same problems installing Flash 9 on IE7 with WinXP
Pro SP3. I have run the uninstaller (checked the log and made sure everything
was removed", run subinacl and the reset_minimal.cmd file, checked my active-x
and IE security settings, have an administrator account, disabled all popup
blockers and anti-virus programs (basically all my background programs are
exited), but I still can't install the Flash Player 9 Active-X for Internet
Explorer. I also can't install it from the Flash page which downloads it
directly to IE7. Here is a copy of my install.log file, I hope this helps
someone.[/q]

Hi wongnog,

Please open a FREE Technical Support case from here:

http://www.adobe.com/support/contact/

Reply with the case number and I will help you resolve this issue.

[Darren McNally - Adobe]

[q][i]Originally posted by: [b][b]ZooeyC[/b][/b][/i]
Darren at Adobe,

Thanks for getting involved on this issue. My Flash has not worked in about
two months.

I have followed all of your suggestions but still no luck. After performing
all the fix steps and when attempting to install from the
adobe.com/go/getflashplayer page I get a tn_19166 error message again. Also,
when I ran the reset_minimal.cmd, which runs subinacl.exe in the registry, and
I look back at what it did in the registry, the only message displayed over and
over is (something like) "did not recogize subinacl as an internal or external
command." Does this mean it is not fixing the registry problem?

Please let me know if you have any other suggestions to fix. Thanks.
[/q]

Hi ZooeyC,

If you receive the following message when running Microsoft?s SubInACL tool,
"did not recognize SubInACL as an internal or external command", it may be that
both the reset_min.cmd file and SubInACL are NOT located in the same directory
(for example you?re desktop). Please try the following:

1. Please download Microsoft?s tool to your desktop.

http://www.supportflash.com/reset_min.zip

2. unzip the ?reset_minimal.cmd? and the ?subinacl.exe? to the desktop


[b]*** Make sure both files are on the desktop[/b]

3. Close out all applications
4. Run the ?reset.cmd? file
5. It will open a DOS like terminal and start running through registry keys
6. When it is finished it will say ?press any key to continue?
7. At this point you can download the latest Flash Player from here:

http://www.adobe.com/go/getflashplayer

If the ActiveX install still fails after these instructions please open a FREE
Technical Support case from here:

http://www.adobe.com/support/contact/

Reply with the case number and I will help you resolve this issue.

[drakontes]

[q][i]Originally posted by: [b][b]Darren McNally - Adobe[/b][/b][/i]
If you?re having difficulties with the ActiveX installer on IE these steps
will typically resolve the issue:

Try this first: Instructions for uninstalling and reinstalling the Flash
Player:

1. First download the uninstaller to your desktop from here
http://www.adobe.com/go/tn_14157
2. Before running this uninstaller be sure to read the instruction and close
all running programs.
3. Open the following folder C:\WINDOWS\system32\Macromed\Flash
4. Run the uninstaller
5. What files are left in this folder? C:\WINDOWS\system32\Macromed\Flash
6. If there are files left, delete the Flash folder.
7. Install the Flash Player from here: ]http://www.adobe.com/go/getflashplayer
8. Test the Flash Player here: http://www.adobe.com/products/flash/about/

Also check your Internet Explorer ActiveX settings

Browser security settings should be chosen by you or by your system
administrator. For single users who do not have an administrator, the Medium:
Default Level allows you to view Flash content. For any Custom Level, ensure
that both the "Download Signed ActiveX controls" and "Run ActiveX controls and
plug-ins" options are set to "Prompt".

To change your security level:

1. Open Internet Explorer.
2. Choose Tools > Internet Options.
3. Select the Security tab.
4. Select Custom Level.
5. Find the section "ActiveX controls and plug-ins".
6. Set ' Download Signed ActiveX Controls' to Prompt.
7. Set 'Run ActiveX Controls And Plug-ins' to Prompt.

If you are having trouble, make sure that your Internet Explorer security
level is not set to High or to a custom level that does not allow viewing of
ActiveX controls.

Finally, it may be that you have incorrect permissions in the system registry:

To fix these Windows system registry permission conflicts you can use
Microsoft?s SubInACL tool.

Please download Microsoft?s tool to your desktop.

http://www.supportflash.com/reset_min.zip

1. Login as the User that has the incorrect permissions in the system registry
2. unzip the ?reset_minimal.cmd? and the ?subinacl.exe? to the desktop

*** Make sure both files are on the desktop

3. Close out all applications
4. Run the ?reset.cmd? file
5. It will open a DOS like terminal and start running through registry keys
6. When it is finished it will say ?press any key to continue?
7. At this point you can download the latest Flash Player from here:

http://www.adobe.com/go/getflashplayer[/q]
Thank you very much!
I tried uninstalling/reinstalling the flash player first, but no joy.
Changing my security settings didn't make any difference.
Ran reset.cmd file and that worked. Thank you very much!
Prior to running the reset.cmd file, CS3's Production Premium updater
unsuccessfully attempted to install updates, several times. Each time I was
prompted to reinstall my software. After running the reset.cmd file, the
updater successfully installed all the updates and everything appears to be
good to go.
I wasn't looking forward to uninstalling/reinstalling my software and it turns
out I didn't have to...so thanks again.

[Darren McNally - Adobe]

[q][i]Originally posted by: [b][b]drakontes[/b][/b][/i]
[Q][I]Originally posted by: [B][B]Darren McNally - Adobe[/B][/B][/I]

Incorrect permissions in the system registry:

To fix these Windows system registry permission conflicts you can use
Microsoft?s SubInACL tool.

Please download Microsoft?s tool to your desktop.

http://www.supportflash.com/reset_min.zip

1. Login as the User that has the incorrect permissions in the system registry
2. unzip the ?reset_minimal.cmd? and the ?subinacl.exe? to the desktop

*** Make sure both files are on the desktop

3. Close out all applications
4. Run the ?reset.cmd? file
5. It will open a DOS like terminal and start running through registry keys
6. When it is finished it will say ?press any key to continue?
7. At this point you can download the latest Flash Player from here:

http://www.adobe.com/go/getflashplayer[/Q]
Thank you very much!
I tried uninstalling/reinstalling the flash player first, but no joy.
Changing my security settings didn't make any difference.
Ran reset.cmd file and that worked. Thank you very much!
Prior to running the reset.cmd file, CS3's Production Premium updater
unsuccessfully attempted to install updates, several times. Each time I was
prompted to reinstall my software. After running the reset.cmd file, the
updater successfully installed all the updates and everything appears to be
good to go.
I wasn't looking forward to uninstalling/reinstalling my software and it turns
out I didn't have to...so thanks again.

[/q]

Thanks drakontes,

Glad to hear that you got this resolved. SubInACL is a Microsoft program that
repairs permissions. For others out there experiencing issues with Windows IE
ActiveX installers, this might help you.

[jlici]

I tried all the steps that you suggested...I still get the message "failure to insatall Active X control....Is this the same message that you were receiving ?:confused;

[BUZZ KPO]

[q][i]Originally posted by: [b][b]dr00t[/b][/b][/i]
Alright everyone, I have solved this issue. I hope it works for all of you as
well.

You must have administrator privileges to successfully complete these
instructions.

1. Follow the instructions to download the SubInACL tool from the Microsoft
Download Center.
http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf
-ed6985e3927b&displaylang=en

2. Install SubInACL.

3. Download the reset_minimal.zip file.
http://www.adobe.com/support/flashplayer/ts/documents/fb1634cb/reset_minimal.zip

4. Extract the reset_minimal.cmd file to C:\Program Files\Windows Resource
Kits\Tools\.

5. *Important: Be sure that both the subinacl.exe and reset_minimal.cmd files
are in the same location here: C:\Program Files\Windows Resource Kits\Tools\.

6. Double-click reset_minimal.cmd.

7. This will open a command window and execute the SubInACL tool.

8. Do not use the machine while SubInACL is running.

9. When it is finished you will see "Press any key to continue".

10. Install the Flash Player from www.adobe.com/go/getflashplayer.[/q]

[Vervear]

You will not read too far 'til you realize I am not too smart at this. I just
want flash Have tried for months and months to install flash. Can you tell me
what the line means that says "You must have administrator privileges to
successfully complete these instructions"?

[Y1411]

Have tried all the steps that I have read of, but instead of seeing the FLV movie to verify the installation, I get a blank wintow with the small 'X' box in the upper left corner. What am I missing?

[rcvanderplaat]

:confused; Hi, I have given up trying to get flash going on IE7, there is a
exelent offline installer for firefox, why isnt there a offline installer for
IE? it would make life much easier.

I am turning into a grumpy old man and getting cranky with the world with
vista and IE causing me pain! Ah!!

Please make life easy again, make a offline installer avalable! or let me know
the URL... I cant find one on google.

[Arrghmatey]

I have this tool, and it did work once, then (probably after some MS update, or
perhaps after installling Adobe Creative Suite) the player problem resurrected
itself. I reused this tool which I'd kept in my downloaded files with no luck.
Do you think I need to reinstall the SubInACL tool?

[dr00t]

I would recommend doing so. Let us know how that goes.

[fdarweesh]

This message to Adobe Stuff:

Does this problem happened from Adobe side or Microsoft side
Because for me as developer ,it is not how to solve this problem for me,it is
beyound that
To how my application users will install the player again
Since this problem touch the main core of our business when flash player
looses internet spread and popularity

Feras Darweesh

[BUZZ KPO]

Fantastic. I followed your instructions and it solved my problem.
Thanks

[googoogajoo]

I found a solution that may help with the Flash Player installation. I have
Windows XP Home and Internet Explorer 7. I did EVERYTHING tech support and
other users suggested, but had no luck on Internet Explorer. I followed the
suggestion to download Firefox, and then I was able to download and use Flash
Player, but it would only work with Firefox. It would not work with Explorer.
Coincidentally, in trying to open another unrelated application, I was
told that Windows could not open it and I chose the option to use the Internet
to search for a way to open it. It prompted to download additional software,
and one of the options was a free version of a registry compression tool called
"Stuffit". After downloading and installing Stuffit, I once again followed
Adobe tech support's original instructions for Flash Player.
1. Make sure you are in Administrator Mode.
2. Make sure your Active X settings are correct.
3. Make sure your popup blocker is turned off.
4. Use the Flash Player uninstaller, making sure all applications are closed,
and all users are logged off.
5. Then download Flash Player 9 using a standalone installer from the
following:
?http://www.adobe.com/go/tn_14266? (Archived Adobe Flash Players available
for testing purposes).
6. After downloading the installer, make sure all other applications and
windows are closed, then open the ?9r115?
folder and run the ?flashplayer9r115_winax.exe? file.
7. Afterwards, verify if the Flash Player installed successfully by going to
the version test page:
?http://www.adobe.com/go/tn_15507?.

This finally worked for me after NOTHING else did. I hope it helps you.

[Arrghmatey]

It seems like there are two problems. I can download and install the player
plug in but not Active X controls. I believe the tool from MS is worthless but
takes up alot of space, if I can translate it's goggly goo it says there are
problems in the registry but doesn't fix them.

I can live w/o flashy stuff on my pages however I'm wanting to install a
program dependent on Active X controls. It gives the message 'failed to
initiate flash player. Please re-install (the program)'.

How are people having success with the stand-alone installers...you'd think
when the Active X file is separate I'd have more installation luck but I get
the same 19166 message?

Psychiatrists are probably doubling their income from these 'tiny' software
glitches...

[dr00t]

It means that when you log into a computer, unless you have "administrative"
priviledges, you probably will not be able to use my instructions.

You should be able to try the instructions, and if you end up not having
administrative priviledges, then it will let you know you do not have
permission to perform my instructions.

If you don't, then please come back and let us know so we can help you
further. Good luck.

[WebmasterBlog]

I hawe read here a solution of this problem, but i don't finf it now. Search for it.